Painting Tiles

Tiles are a fantastic material– hard wearing, they endure wet, don’t stain, they are simple to tidy and offered in a substantial variety of colours and surfaces. For all those factors they are also tough to get rid of or cover so what do you do if you have a location of tiles that you hate? There are in fact numerous ways you can cover tiles so do not misery! In this post, we will tell you how you paint over tiles.

Re-Tile

Prior to you paint you must believe thoroughly about the practicality of re-tiling. If your room has a shower or bath in it then tiles are great product. There are countless choices– wood panel impact, metal tiles, mosaic tiles, high gloss huge porcelain tiles, marble, stone effect and concrete effect. The options are unlimited. If you are working to a tight budget then you can discover excellent looking tiles for very low prices. You can likewise save money by tiling over your existing tiles instead of eliminating them initially and you can likewise do the tiling yourself rather than employ an expert. Of course, there are plenty of factors that you might not want to re-tile. So what else can you do?

Paint Them

Yes, you can paint over tiles and the effect can be rather excellent. This choice is cheap, quick and requires extremely little ability nevertheless the preparation and the right choice of paint are essential. You can’t paint tiles that will get wet frequently– so do not attempt this on tiles around a bath or in a shower enclosure. You can paint the tiles in the rest of the restroom or in a cooking area.

This is not a very long lasting solution. It can work well for the period of time it takes you to conserve up for more tiles or it can repair an unattractive location while you offer your residential or commercial property. The paint will begin to come off though. If the tile paint gets wet and is cleaned up frequently the paint will come off quicker. Some retouching will be possible but if you have a flat colour it will be noticeable.

How to Paint Tiles– Preparation

You are going to require to roll up your sleeves and use some effort. Preparation is essential– if you don’t do it your paint will merely not stay with the tiles and you will end up with a complete mess. Here is what you need to do;

1) Clean the tiles and grout well to remove all dirt, soap and grease. Get a great firm scrubbing brush and a little headed one for corners and tight spots. Use an abrasive degreasing cleaner. Scrub every tile and crevice well and then rinse off all the cleaning agent.

2) You need to fill all the fractures and missing grout. This is really easy and quick. You can purchase squeezable tubes of tile grout. Squeeze some onto your finger and run it over the holes or cracks forcing the grout into the holes. Leave for a minute and after that wipe the area with a moist fabric to eliminate the excess grout. Leave the grout to dry for as long as it says on the tube.

3) Protect your bathroom components. You must use designer tape and plastic sheeting to cover your sinks, toilets, shower trays etc. It really doesn’t take long however it will save you loads of time and avoid you from destroying your bathroom fixtures with paint splotches.

4) Sanding the tiles is necessary. If you have a large location buy or rent a portable sander. We always advise you to utilize a facemask while sanding. Usage great sandpaper and make sure you have a good system for remembering where you have and have not sanded– on a lot of tiles you won’t be able to see where you have actually sanded and if you miss a patch your paint won’t stick. Keep checking your sandpaper and replace it if it looks worn. If your tiles have angled edges a portable sander might not get them– run over them with sandpaper by hand. Clean off the tiles with great deals of water and delegate dry.

Preparation is now complete.

Select Your Paint

You can either purchase a special tile paint or purchase an undercoat and topcoat. High gloss finishes are best prevented as they will show up any drips or minor imperfections in the tiles or your paint coverage.

All paint stores now stock at least one variety of tile paint which do not need an undercoat. If you are painting a flooring you must buy ceramic paint for floorings– these are a bit more hardwearing than the wall variations. A lot of these paints recommend you just need one coat. In reality, if you want flat ideal coverage you should expect to apply two coats.

Tile paints are normally just offered in a small number of colours and finishes. If you don’t desire any of them then you can pick any paint but use an appropriate undercoat initially. You need to buy an acrylic guide. It might be marketed as a guide for ceramic, a tile primer or tile bonder. If in doubt ask the shop assistants to make sure you have the ideal paint. You will require to apply a minimum of one coat– if you can still see the colour of your old tiles after this use another coat. As soon as the primer has dried you can apply your leading coat. Epoxy paints are the hardest using and you should consider these for areas that will get dirty or cleaned routine– round sinks or behind hobs.

Apply Your Paint

Here’s how you use the paint.

1) Mix your paint really well, a fast shake or stir will refrain from doing it. Use a spatula to scrape the bottom and sides of the container and fold the paint over and in a figure of eight pattern. You may discover darker colours or oils on the bottom or top– you require to keep stirring until all these different colours have mixed uniformly. Specialist tile paints might come with a little bottle of resin that you need to blend into the paint before you use it– DO NOT miss this step. Include the resin and give it a truly great stir in.

2) Paint in small areas as the paint can dry rapidly. If you try to do a big location and run the roller over paint that has begun to dry you can get wrinkles and bumps. Use a small brush to work the paint into the corners and grout lines Then use a small, tight foam roller to use paint over the remainder of the surface of the tiles.

You might choose to use your paint with a sprayer. If so wear a mask!! Apply the paint in a number of thin coats, don’t be lured to use a single thick coat to save time– all you will get are drips and an unequal, unsightly surface.

Sealant

Kitchen and bathroom edges are usually finished with plastic sealants. Paint will not stay with these. You can get rid of the sealant first, do your preparation, paint and after that reapply fresh sealant as soon as your paint has dried. An alternative is masking off the sealant and only painting up to it. You can also try using denatured alcohol and a brush to clean the sealant– this creates small pits in the sealant which can assist paint stick– for a time– however don’t expect it to last as long as the paint on the tiles. You can buy denatured alcohol in any DIY shop, it will be with the paint thinner and white spirit.

Be Creative

There are loads of different paint impacts and you can use them on tiles as well as walls. An effect is great on big walls to add interest and draw attention away from flaws in the tiles or paint coverage. You can purchase textured rollers for your 2nd coat to add a variation in colour. You can use stencils to include patterns. You can use a can of spray paint in a somewhat various colour to your base layer to include variation in colour or texture. Metallic and shine sprays add a really appealing leading layer and sparkles appearance particularly excellent over a flat base colour. We would advise you practice on some spare cardboard so you know how thinly to use the spray paint or how to work the textured roller for best impact.

Other Alternatives

If the tiles are not going to get wet you can wallpaper over them. You still require to finish the preparation but instead of undercoat– you use a thick backing paper. You may also consider completing the gaps between the tiles with tile cement to produce an entirely flat surface before you paper. Then you can apply any wallpaper over the backing layer. Thick and textured papers are best as they will conceal the tile pattern better.

You can use bath panels to cover tiles. These are purchased in packs of 3-6 and they are full height and around 40 cm large. They are very high broad tongue and groove! The surfaces are faux marble, cement and wood. They are completely water resistant and are a good solution for showers.

You can buy a large range of stick-on floor and wall tiles– these are typically plastic and they are available in a variety of finishes; really nasty glossy plastic; thin layers of natural material or high-quality vinyl and ceramic effects. The cost differs widely with quality– some are self-adhesive and some need professional glues.

Post Sponsored by Your Local Glazier. Find us by typing in ‘Glaziers Near Me‘ in Your Google search.

Leave a Reply

Your email address will not be published. Required fields are marked *